S5.01-00 Wood Quality

Poster 258: A Methodological Approach to the Assessment of the Quality of Wood in Norway Spruce (Picea abies Karst.) in Standing Trees - Battistel, Gian Antonio, Brunetti, Michele, Deluca, Enzo, Leonelli, Guido, Macchioni, Nicola, Pollini, Claudio

Poster 259: Anatomical, Physical, and Technological Characteristics of Black Locust - Molnar, Sandor, Szojak, Peterne

Poster 260: The Influence of Silvicultural Treatment on the Quality of Round Wood and Sawn Timber of English Oak (Quercus robur L.) - Peters, Stefan, Becker, Gero

Poster 261: Spiral Compression Wood in Pinus sylvestris L. - Wägenfuhr, Rudi, Saranpää, Pekka


S5.01-01 Formation of Wood

Poster 262: Long Vessels Microcasting: Vessels Ends and Irregularly Perforated Vessel Elements - André, Jean-Pierre

Poster 263: Uptake of Mineral Elements into Phloem, Cambium and Xylem of Spruce (Picea abies [L.] Karst.) - Kuhn, Arnd J., Schröder, Walter H., Bauch, Josef


S5.01-02 Natural Variations in Wood Quality

Poster 264: Quantitative Evaluation of Wood Cell Distribution and Shape by the Fourier Transform Image Analysis - Fujita, Minoru

Poster 265: Wood Anatomical and X-ray Densitometric Investigation of Douglas-Fir from Different Spacings ­ An Experiment to Determine the Proportion of Juvenile Wood - Hapla, Frantisek, Wagner, Brigitte

Poster 266: Natural Variations in Wood Quality Indicators of Indonesian Big-Leaf Mahogany (Swietenia macrophylla King) - Rulliaty, Sri, America, Wilfredo M.


S5.01-04 Biological Improvement of Wood Properties

Poster 267: Visual Assessment of Wood Quality in Standing Trees in Eperua falcata Aublet (Caesalpiniaceae/Leguminosae): Growth Stresses in Buttresses in Relation with their Mechanical Function - Chouquet, I., Fournier, M., Thibaut, B.

Poster 268: Wood Quality of Eucalyptus from Plantations I ­ Spatiotemporal Variations and Influence Factors of three Basic Properties - Gérard, J., Baillères, H., Fournier, M., Thibaut, B.

Poster 269: Non-Destructive Assessment of Modulus of Elasticity in Genetic Field Tests in France - Mamdy, C., Rozenberg, P., Bastien, J.C.

Poster 270: Longitudinal Growth Strains and Drying Shrinkage in Tension Wood of Poplars (Populus euramericana cv I214) - Sassus, F., Fournier, M., Thibaut, B.

Poster 271: The Effect of Cultural Treatments on the Chemical Composition of Plantation-Grown Loblolly Pine Wood - Shupe, T.F., Choong, E.T., Yang, C.H.

Poster 272: Discoloration: Brown Streaks and Firm Rot in Birch (Betula pendula Roth. and Betula pubescens Ehrh) Wood - Ylioja, T., Schulman, E., Velling, P., Rousi, M., Roininen, H., Anneli, V.A.


S5.01-05 Wood Properties Desired by End-Users

Poster 273: Wood Properties Desired for Pencil Slats - Mandang, Y.I.


S5.03-00 Wood Durability and Fire Protection

Poster 274: Assessment of Wood Photodegradation by Microtensile Testing - Derbyshire, Hilary, Miller, Eric Roy, Sell, Jürgen, Turkulin, Hrvoje


S5.03-09 Wood Durability

Poster 275: Natural Antioxidant for Wood Protection - Fernández, Ana M., Urizar, Silvio


S5.04-00 Wood Processing

Poster 276: Influence of Sulphate Process Parameters on Mechanical Characteristics of Pulp from Poplar Wood - Klasnja, Bojana, Kopitovic, Spiro


S5.04-06 Wood Drying

Poster 277: Comparison between Convection and Vacuum Drying Processes of Different Grown Ash Timber (Fraxinus excelsior L.) - Quer, Manfred, Oliver-Villanueva, José Vincente, Becker, Gero


S5.04-07 Adhesives and Wood Gluing

Poster 278: Continual Monitoring of Formaldehyde Liberation from Liquid and Cured Resins and from Manufactured Wood Boards - Crnogorac, Olga, Miljkovic, Jovan

Poster 279: Adhesive Bonding of Polyurethane Coating to Wood Surfaces - Jaic, Milan, Miljkovic, Jovan, Zivanovic, Rajka, Filipovic, Jovanka, Petrovic-Djakov, Dusanka

Poster 280: Phenolic Resins from Biomass Pyrolysis Oils - Kelley, Stephen S., Myers, Michele, Johnson, David K., Scahill, John, Chum, Helena L.


S5.04-08 Sawmilling and Machining

Poster 281: Optimization of Bandsaw Tooth with Finite Element Method - Fujii, Yoshihisa, Okumura, Shogo, Sawada, Yutaka

Poster 282: Pattern Recognition of Sound in Wood Cutting with Neural Network - Fujii, Yoshihisa, Okumura, Shogo, Sawada, Yutaka, Ikegiwa, Hiroyuki

Poster 283: Lateral Movement of the Band Saw Blade and Machine's Own Resistance Power in Relation to the Strain Force - Goglia, Vlado, Beljo, Ruzica

Poster 284: Effects of cutting Width and Cutting Height on the Size Distribution of Black Spruce Pulp Chips Produced by a Chipper-Canter - Hernandez, Roger, Lessard, Julie

Poster 285: Improvement of Sound-Absorbing Capacities of Wooden Fence by Surface Grooving and Boring - Kitayama, Shigeru, Hattori, Nobuaki, Sueyoshi, Shuzo, Tanaka, Chiaki

Poster 286: Cutting Force as Main Criterion for Machineability of Beech in Molding - Skakic, Dusan, Krdzovic, Almir, Durisic, Zoran

Poster 287: Research on the Wood Cutting Process at Archangel Engineering University - Soloviev, V., Senkevitch, L.

Poster 288: The Circular Saw Universal Rotation Speed, What Is It? - Stakhiev, Yury M., Ershov, Sergey V.


S5.04-10 Production Systematics

Poster 289: Automatic Sorting Method of Laminae for Glue-Lam with the Aid of AI - Tochigi, Toshiro, Tadokoro, Chiaki, Satoh, Hideo


S5.04-12 Surfacing and Finishing

Poster 290: Surface Properties of Hardwood Species Determined by ESCA - Jaic, Milan, Stevanovic Janezic, Tatjana, Zivanovic, Rajka, Dekanski, Aleksandar


S5.04-13 Industrial Engineering and Operations

Poster 291: LVL/LOCATION: A Computer-Based Decision Model for Determining Optimal Laminated-Veneer-Lumber Plant Location and Size - Lin, Wenjie, Carino, Honorio F., Muehlenfeld, Ken

Poster 292: Noise in Wood Industry Works and Urban Environments - Todorovic, Petar, Aleksov, Ivan, Miljkovic, Jovan, Djiporovic, Milanka


S5.05-00 Composites and Reconstituted Products

Poster 293: Flexural Properties and Dimensional Changes of Veneer Overlaid OSB Composite Panels from Southern Yellow Pine - Biblis, Evangelos, Grigoriou, Athanasios, Carino, Honorio

Poster 294: LVL Panels by Rotary Cutting of Chestnut (Castanea sativa Mill.) Stems from Coppice Stands - Cielo, Paolo, Macchioni, Nicola, Thibaut, Bernard, Zanuttini, Roberto

Poster 295: Production of Prefinished Composite Parquet with Chestnut Timber from Coppice Stands - Cielo, Paolo, Thibaut, Bernard, Zanuttini, Roberto

Poster 296: The Effect of the Urea Resin Modification with Alkyl Derivatives of Phenol and Resorcinol on the Properties of Particle Boards - Lecka, Janina, Morze, Zbigniew

Poster 297: Improvement of the Dimensional Stability and Preservations Properties by Thermochemical Densification Treatment: Retified Wood Plastic Composite - Nebesarova, Ivana, Guyonnet, René

Poster 298: Wood Surface Stabilization, Cell Wall Bulking - Wallström, L.


S5.05-01 Wood-Based Composites

Poster 299: The Forecast of Wettability via Infra-Red Absorptions of Acetylated Wood Particles - Miljkovic, Jovan, Djiporovic, Milanka, Todorovic, Petar


S5.05-02 Recycling and Recycled Products

Poster 300: Charcoal Using Wood Waste from Housing Demolition - Arima, Takanor, Kobayashi, Shoichi, Soeda, Yumiko


P5.01-00 Properties and Utilization of Tropical Woods

Poster 301: Properties of Plantation Grown Acacia Species and Their Relation to Utilization in Egypt - Megahed, M.M., El-Osta, M.L.M., Abou-Gazzia, H.A., El-Baha, A.A.


P5.03-00 Energy and Chemicals from Forest Biomass

Poster 302: Amazonian Indigenous Woods for Reforestation for Charcoal Production - Azevedo Corrêa, Antônio de

Poster 303: Chemical Conversion of the Amazonian Woods: Charcoal and Briquette of the Charcoal - Azevedo Corrêa, Antônio de

Poster 304: High Efficient Carbon Sorbents on the Basis of Wood Waste - Dobele, G., Bogdanovitch, N., Telysheva, G., Dizhbite, T., Viesturs, U.

Poster 305: The Energetic Use of The Residues Generated by the Pine Sawmills - Fontes, Paulo José P.

Poster 306: Co-Production of Energy and Activated Carbon from Rubber Wood Waste - Kong, Hoi Why, Grover, P.D., Nor, Salleh Mohd.

Poster 307: Essential Oils Production from Technical Foliage of Native Conifers of Serbia - Stevanovic Janezic, Tatjana, Vilotic, Dragica, Bujanovic, Biljana, Kolin, Branko, Jancic, Radisa


P5.03-01 Fundamentals of Wood Carbonization

Poster 308: Yields of Pyrolytic Products from Six Plantation Eucalypt Species grown for Saline Soil Amelioration - Fung, Paul Y.H., Ng, Soo H., Muruganathan, Velauthapillai, Vos, Adrian de

Poster 309: Researches Concerning the Chemical Modification of Aspen Wood - Timar, Cristina, Mihai, Daniela


P5.04-00 Production and Utilization of Bamboo and Related Species

Poster 310: Mechanical Properties of Date Palm Leaves' Midrib (DPLM) in Relation to its Utilization as a Substitute for Solid Wood - El-Mously, H.A., Zamzam, M.A., Ibrahim, N.H.


P5.05-00 Tree Ring Analysis

Poster 311: Effects of Local Air Pollution on Ring-Width of Cryptomeria japonica D. Don Growing in Central Honshu, Japan - Katoh, Terutaka, Taniguchi, Naoya, Kasuya, Minoru, Suzuki, Shoichi, Kozuka, Hiroshi

Poster 312: A Dendrochronological Analysis of a Mated Tree of Cryptomeria japonica D.Don Growing in Central Honshu, Japan - Katoh, Terutaka, Taniguchi, Naoya, Kozuka, Hiroshi, Kasuya, Minoru


P5.06-00 Forest Products Marketing

Poster 313: Phytosanitary Measures and Forest Products Markets - Bigsby, Hugh

Poster 314: Marketing of Forest Enterprises ­ State of Research in Germany, Austria and Switzerland - Borowski, Szymon, Becker, Michel

Poster 315: Simulation Model of Future Markets for Sawn Wood Components - Hartikainen, Timo, Pirkola, Kaisa

Poster 316: Environmentally Driven Consumer Behavior: Understanding the Choice of Household Paper - Makkonen, Martti

Poster 317: The Relationship Between Customer Orientation and Business Performance - Martikainen, Pasi, Pesonen, Miikka

Poster 318: Pricing Promotions for Wood Products Retailers and Suppliers - Michael, Judd H., Mulhern, Francis J.

Poster 319: Brazil in the World Trade of Forest Products ­ Export Performance and Government Policy from 1961 to 1990 - Müller, Suzana S.

Poster 320: Success Factors of the Finnish Sawmill Industry - Niemelä, Juha S.

Poster 321: UN-ECE/FAO International Market Information - Pepke, Ed

Poster 322: The Use of Conjoint Analysis to Improve Product Offerings: Examples from U.S. Forest Products Industries - Reddy, Vijaya S., Bush, Robert J., Roudik, Ronen

Poster 323: An International Market Perspective of U.S. Hardwood Product Suppliers - Smith, Paul M., Haas, Michael P., West, Cynthia D.

Poster 324: The Application of Modern Decision-Making Techniques in the Marketing of Timber: Understanding Bridge Material Selection by U.S. Highway Officials - Smith, Robert, Bush, Robert, Schmoldt, Daniel

Poster 325: Marketing in Polish Forest Products Industry - Strykowski, Wladyslaw, Ratajczak, Ewa

Poster 326: Market Oriented Product Concept in the Forest Industry - Toivonen, Ritva, Ahola, Paula

Poster 327: Interorganizational Information Systems: Emerging Technologies in the North American Wood Products Industry - Vlosky, Richard P.

Poster 328: A Resource Input-Product Output Model for US Dimension Manufacturers including Industry Development Success Factors - Vlosky, Richard P.


P5.07-02 Medicinal and Aromatic Plants

Poster 329: In vitro Culture of Neem (Azadirachta indica) for Propagation and Genetic Conservation - Roy, Shyamal K., Asaduzzaman, M.